15-in LF cone, vented; 1.4-in exit HF compression driver, horn-loaded.

MK5394i Passive 2-Way Full-Range Loudspeaker

PRODUCT INFORMATION

The MK5300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes.

To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 15-inch LF driver was used to complement the sonic character and output of the HF driver. All MK5300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price.

Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers.

The MK5300i Series systems are the larger companions to the MK2300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.

  • Premium Performance
  • Application Flexibility

CONFIGURATION

Subsystem:

Transducer: LF – 1x 15 in. cone;  HF – 1x 1.4 in. exit, 3 in. voice coil compression driver

Loading: LF – Vented; HF – Horn-loaded

Operating Mode:

Amplifier Channels: Single-amp LF/HF; Bi-amp LF, HF

External Signal Processing: High pass filter; DSP w/2-way filters

PERFORMANCE

Operating Range (-10 dB, Hz)

48Hz – 16KHz

Axial Sensitivity (1W @ 1m, dB SPL)

LF: 98

HF: 107

Full Range: 97

Power Handling/Impedance (Watts @ Ohms)

LF: 800 @ 8

HF: 150 @ 8

Full Range: 800 @ 8

Calculated Maximum Output Peak (dB SPL)

LF: 133

HF: 134

Full Range: 132

Calculated Maximum Output Long Term (dB SPL)

LF: 127

HF: 128

Full Range: 126

Nominal Coverage (degrees)

Horizontal: 90

Vertical: 45

Powering

Switchable: bi-amplified or passive

ORDERING DATA

Versions

MK5394i Black 2040049

MK5394i White 2040050

MK5394i-WP Black 2040051

Accessories Part Number
Eye Bolt 0.375-16 X 1.25 in, EB3825
104001
U-Bracket MK2(5)000 Black, UBKT2353
0007869
U-Bracket MK2(5)000 White, UBKT2353
0015076
Flybar SBK-MK53 VFS-VFR159 Black, FB5VSK
2038320

Dimensions (inches/millimeters)

Height: 30.00/762

Width (front): 18.71/475

Width (rear): 8.88/226

Depth: 19.73/501

Trap. Angle (degrees per side): 15

Weights (pounds/kilograms)

Net: 77/34.9

Shipping: 87/39.5