15-in LF cone, vented; 1.4-in exit HF compression driver, horn-loaded.

MK5399i Passive 2-Way Full-Range Loudspeaker


The MK5300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes.

To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 15-inch LF driver was used to complement the sonic character and output of the HF driver. All MK5300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price.

Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers.

The MK5300i Series systems are the larger companions to the MK2300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.

  • Premium Performance
  • Application Flexibility



Transducer: LF – 1x 15 in. cone;  HF – 1x 1.4 in. exit, 3 in. voice coil compression driver

Loading: LF – Vented; HF – Horn-loaded

Operating Mode:

Amplifier Channels: Single-amp LF/HF; Bi-amp LF, HF

External Signal Processing: High pass filter; DSP w/2-way filters


Operating Range (-10 dB, Hz)

48Hz – 18KHz

Axial Sensitivity (1W @ 1m, dB SPL)

LF: 98

HF: 105

Full Range: 98

Power Handling/Impedance (Watts @ Ohms)

LF: 800 @ 8

HF: 150 @ 8

Full Range: 800 @ 8

Calculated Maximum Output Peak (dB SPL)

LF: 133

HF: 133

Full Range: 133

Calculated Maximum Output Long Term (dB SPL)

LF: 127

HF: 127

Full Range: 127

Nominal Coverage (degrees)

Horizontal: 90

Vertical: 90


Switchable: bi-amplified or passive



MK5399i Black 2040055

MK5399i White 2040056

MK5399i-WP Black 2040057

Accessories Part Number
Eye Bolt 0.375-16 X 1.25 in, EB3825
U-Bracket MK2(5)000 Black, UBKT2353
U-Bracket MK2(5)000 White, UBKT2353
Flybar SBK-MK53 VFS-VFR159 Black, FB5VSK

Dimensions (inches/millimeters)

Height: 30.00/762

Width (front): 18.71/475

Width (rear): 8.88/226

Depth: 19.73/501

Trap. Angle (degrees per side): 15

Weights (pounds/kilograms)

Net: 77/34.9

Shipping: 87/39.5