facebooktwitteryoutube

DOCUMENTATION   |   CONTACT  |   SWAG    |  

8-in LF cone, vented; 1-in exit HF compression driver, horn-loaded.

MK8126i 120×60 Passive 2-Way Full-Range Loudspeaker

PRODUCT INFORMATION

The MK8126i two-way loudspeaker system sets the new standard in installation performance by solving the chronic problems of compact two-way loudspeakers. Yet it’s size is actually smaller than many of the compact two-ways it outperforms.

The HF horn loading the 1-in exit/1.5-in voice coil compression driver is larger than most traditional compact two-way horns. This extends pattern control lower into the midrange than would otherwise be possible and allows the horn’s pattern to overlap the woofer’s pattern in the critical crossover area.

Advanced beamwidth matching crossover point selection transitions between the subsystems exactly where the HF horn’s 120° (h) x 60° (v) coverage pattern matches the woofer’s pattern. This eliminates the beamwidth mismatch that creates off-axis voids in the crossover area of traditional two-way systems.

The internal passive crossover/filter network uses complex, asymmetrical slopes to integrate the subsystems and goes beyond merely dividing the signal to perform critical equalization functions.

  • System includes an 8-in woofer and a 1-in exit/1.5-in voice coil compression driver on a 120° x 60° CD horn
  • Internal passive crossover/filter network allows powering by a single amp channel while smoothing power response
  • Beamwidth optimized crossover points eliminate off-axis voids through crossover
  • User-rotatable horn lets you “rotate the enclosure around the horn” to mount them vertically or horizontally

CONFIGURATION

Subsystem:

Transducer: LF – 1x 8 in. cone;  HF - 1x 1-in exit/1.5-in voice coil compression driver on CD horn

Loading: LF – Vented; HF – Horn-loaded

Operating Mode:

Amplifier Channels: Single-amp LF/HF

External Signal Processing: High pass filter; DSP w/2-way filters

PERFORMANCE

Operating Range (-10 dB, Hz)

60Hz – 18KHz

Axial Sensitivity (1W @ 1m, dB SPL)

Full Range: 95

Power Handling/Impedance (Watts @ Ohms)

Full Range: 300 @ 8

Calculated Maximum Output Peak (dB SPL)

Full Range: 126

Calculated Maximum Output Long Term (dB SPL)

Full Range: 120

Nominal Coverage (degrees)

Horizontal: 120

Vertical: 60

Powering

Full range

ORDERING DATA

Versions

MK8126i Black 0031667

MK8126i White 0031668

MK8126iMT 128W Black 0031693

MK8126iMT 128W White 0031699

MK8126iMTPL-WP 128W Black 2036609

MK8126iPL-WP Black 2035764

Accessories Part Number
U-Bracket MK8100 Black, UBKT81
0015344
U-Bracket MK8100 White, UBKT81
0015829

Dimensions (inches/millimeters)

Height: 19.75/502

Width (front): 11.75/299

Width (rear): 6.00/152

Depth: 11.03/280

Trap. Angle (degrees per side): 22.5

Weights (pounds/kilograms)

Net: 31/14.1

Shipping: 34/15.5