3-Way Self-Powered Loudspeaker,

RSX208L 3-Way Self-Powered Loudspeaker

PRODUCT INFORMATION

Designed to streamline setup and deliver maximum results in minimum time, RADIUS couples unique and intelligent features with EAW’s signature acoustical design to deliver solutions for rental firms and system integrators. The RADIUS articulated array features OptiLogic, providing automatic array self-detection and instant optimization including air loss compensation and more. EAWmosaic™ app provides total system optimization from anywhere in the venue, plus intuitive room design and prediction in a single, comprehensive application. With the proven sonic performance of EAW’s acoustic design and DSP mastery plus full Dante integration across the line, RADIUS delivers an intelligent and flexible system to fit any budget.

  • OptiLogic™ provides array self-detection via onboard infrared sensors and accelerometers for near-instant optimization that cuts down on setup and tuning time.
  • Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue.
  • Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels.
  • Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability.

CONFIGURATION

Subsystem:

Transducer: LF – 1 x 8 in cone, 2 in voice coil; LF/MF – 1 x 8 in cone, 2 in voice coil; HF – 2 x 1 in exit, 1.4 in voice coil compression drivers.

Loading: LF – Vented; LF/MF – Vented; HF – Horn-loaded

Operating Mode:

Amplifier Channels: Tri-amp LF,LF/MF, HF

External Signal Processing: DSP w/EAW Focusing™ and DynO™

PERFORMANCE

Operating Range

70 Hz to 18 kHz

Nominal Beamwidth

Horizontal 120°

Vertical 12°

Calculated Axial Output Limit (whole space SPL)

Average: 122 dB LF,MF, HF

Peak: 128 dB LF,MF, HF

Input

Type

Electronically balanced

Max Input Level

21dBu

Impedance

20 kOhm (balanced)

Input Wiring

XLRF, Pin 1 chassis, pin 2 +, pin 3 – separate loop-thru XLRM (for analog signal only)

Input Selection

Analog, Dante

Amplifiers & Processing (LF/MF/HF)

Type

Modified Class D

Maximum Output

3x 500W

Driver Protection

Integral DSP limiting

AC Mains (nominal)

Connector

Neutrik PowerCon®

Input

100 V to 240 V

Frequency

50 Hz to 60 Hz

PowerConsumption

Idle – 26W

Peak Draw – 250 W

Controls/Communication

Connections

2x Neutrik® etherCON™, RJ-45

Protocols

Ethernet/Dante

Software

EAWmosaic™ (available on the App Store)

Indicators

LCD Screen on amplifier panel for UI, Logo LED (User-definable behavior)

User Controls

Push-button Rotary Encoder

ORDERING DATA

Versions

EAW RSX208L BLACK 2047570-90

Accessories Part Number
EAW FBX100 FLYBAR BLACK
2047169-00
EAW ACC WEATHER SHIELD HORZ BLK
2047681
EAW SBX100 STAND MOUNT BLACK
2047369

Dimensions (inches/millimeters)

Height: 9.8/249

Width: 27/683

Depth: 13/332

Trap. Angle (degrees per side):

Weights (pounds/kilograms)

Net: 40.5/18.4