10-in LF cone, vented; 1-in exit compression driver, horn-loaded.

VFR109i Passive Two-Way Enclosure

PRODUCT INFORMATION

The new VFR “i” revision brings the VF concept more fully into the EAW product line. VFR “i” Series black versions provide both side handles and a handle designed into the rear of the cabinet. An installation only white version comes without handles or a pole mount cup.

The VFR109i two-way, full range loudspeaker system includes a direct-radiating, vented, 10-in LF cone transducer and a 1-in exit / 1.75-in voice coil HF compression driver loaded with a large, square, user-rotatable 90×60 coverage pattern horn built on the classic MK Series horns. These horns deliver exceptional high frequency dispersion, and their square shape lets users “rotate the enclosure around the horn” to maintain directivity in a horizontal configuration.

Because VF Series full range systems (VFR/VFM) use HF sections similar to those developed for the MK Series, EAW engineers could employ the same revolutionary “beamwidth-matching” internal passive crossover/ filter networks that set the MK Series apart from all other two-way systems. If powered by an EAW-specified amplifier or via a UX Series digital signal processor, the VFR109i can enjoy the benefits of EAW Focusing, a technology that eliminates the anomalies inherent in the time domain of any loudspeaker.

The VFR109i black version includes traditional portable features such as a pole-mount cup, parallel NL4 4-terminal connector, barrier strip connector, an optional transformer and handles that accept accessory covers for permanent installation. The white, installation-only versions omit handles and the pole-mount cup but include NL4 connector, barrier strip connector, an optional transformer, and multiple mounting points. The new design leaves the enclosure sides completely smooth and attractive.

Six year warranty.

  • Two-way, full range loudspeakers
  • Beamwidth-matching crossover point
  • User-rotatable horn for optimized pattern control
  • Easy lift handles (Black version only)

CONFIGURATION

Subsystem:

Transducer: LF 1x 10-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver

Loading: LF Vented; HF Horn-loaded

Operating Mode:

Amplifier Channels: Single-amp LF/HF

External Signal Processing: High pass filter

PERFORMANCE

Operating Range (-10 dB, Hz)

65 – 20k

Axial Sensitivity (1W @ 1m, dB SPL)

Full Range Passive: 95

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 500 @ 8

Calculated Maximum Output Peak (dB SPL)

Full Range Passive: 128

Calculated Maximum Output Long Term (dB SPL)

Full Range Passive: 122

Nominal Coverage (degrees)

Horizontal: 90

Vertical: 60

Subsystems

LF: 10-in cone, vented

HF: 1-in exit compression driver, horn-loaded

Powering

Full range

ORDERING DATA

Versions

VFR109i Black 2041019-90

VFR109i White 2041035-90

Accessories

Eye Bolt Forged Shoulder M10 X 1.5 X 37mm
0029818
U-Bracket Black, UBKT-V10U
2038756-90
U-Bracket White, UBKT-V10U
2039218-90
Transformer Kit, ACC-TXVFR
2039034

Dimensions (inches/millimeters)

Height: 19.9/506

Width (front): 12.8/325

Width (rear): 6.1/156

Depth: 13.1/332

Trap. Angle (degrees per side): 15

Weights (pounds/kilogram)

Net: 37/16.8

Shipping 48/21.8