MW10

STAGE MONITOR ENCLOSURE

The MicroWedge MW10 is collaboration between original MicroWedge Series inventor Dave “Rat” Levine (founder of Rat Sound Systems, Inc.) and the EAW Engineering Department, resulting in dramatically upgraded performance and ergonomics. The coaxial design pairs a 10-inch woofer with a 1.75-inch voice-coil compression driver to provide full yet controlled 90-degree conical dispersion.

Core Technologies
FOCUSING
Design + Build

Product Description

All frequencies emanate from the exact same point, eliminating crossover region problems and time/phase irregularities, as well as optimizing coherency. The coaxial approach also contributes to a very compact, low-profile footprint.

The port on the front of the cabinet enhances LF response in coupling with the floor, the opening also houses a convenient carrying handle and dual NL4 connectors.

The MW10 enjoys the advantage of working equally well as a stage monitor or as a console bridge monitor. It was designed with a sturdy balance so that when set upright (on its backside) it rests easily on either side of a console bridge. A conveniently located pair of NL4 connectors further simplifies console setup. An optional pole mount is also available.

The Baltic birch cabinets are available in a black or white finish. The black monitors are protected with EAW’s RoadCoatTM which provides a black finish and tremendous scratch resistance. The rugged steel grill keeps its distinctive shape even if stood upon. Points for Omni-mount plates are located the bottom of the MW10 to aid in hanging the monitors.

For applications that require enhanced performance the MW10 can be optimized using the EAW UX48 digital signal processor or an EAW UXA amplifier.

  • 6 year warranty
  • Highly coherent coaxial design (10-inch woofer, vented)
  • Enhanced fidelity and power handling
  • Upgraded transducers and crossover design
  • Convenient input connector location
  • Sturdy balance for console bridge monitor use
The Details Matter

Specifications

Frequency Response
65hz – 20khz
Max SPL
134 dB
Operating Mode

Single-amp LF/HF
High pass filter

Subsystem

LF: 10-in cone, vented, coaxial with HF
HF: 1-in exit compression driver, horn-loaded

Nominal Beamwidth
Horizontal: 90
Vertical: 90
Power Handling

Full Range: 500W @ 8ohms

Connections

NL4 Input/Loop

Dimensions

Height: 11.36 in (288.5 mm)
Width: 13.07 in (332 mm)
Depth: 18.41 in (467.7 mm)

Weight

40.5 lbs (18 kg)

Find the Right Speaker

Series Range

STAGE MONITOR ENCLOSURE

Subsystem

LF: 12-in cone, vented, coaxial with HF
HF: 1x 1.4 in exit, 3 in. voice coil compression driver, Horn-loaded

Nominal Beamwidth

Horizontal: 90
Vertical: 90

Frequency

64hz – 20khz

Max SPL

140 dB

STAGE MONITOR ENCLOSURE

Subsystem

LF: 15-in cone, vented, coaxial with HF
HF: 1x 1.4 in exit, 3 in. voice coil compression driver, Horn-loaded

Nominal Beamwidth

Horizontal: 90
Vertical: 90

Frequency

62hz – 20khz

Max SPL

140 dB

MW8

STAGE MONITOR ENCLOSURE

Subsystem

LF: 8-in cone, vented, coaxial with HF
HF: 1-in exit compression driver, horn-loaded

Nominal Beamwidth

Horizontal: 90
Vertical: 90

Frequency

73Hz – 18kHz

Max SPL

131 dB