facebooktwitteryoutube

DOCUMENTATION   |   CONTACT  |   SWAG    |  

12-in LF cone, vented; 1.4-in exit HF compression driver, horn-loaded.

MK2366i Passive 2-Way Full-Range Loudspeaker

PRODUCT INFORMATION

The MK2300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes.

To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 12-inch LF driver was used to complement the sonic character and output of the HF driver. All MK2300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price.

Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers.

The MK2300i Series systems are the smaller companions to the MK5300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.

  • Premium Performance
  • Application Flexibility

CONFIGURATION

Subsystem:

Transducer: LF – 1x 12 in. cone;  HF - 1x 1.4 in. exit, 3 in. voice coil compression driver

Loading: LF – Vented; HF – Horn-loaded

Operating Mode:

Amplifier Channels: Single-amp LF/HF; Bi-amp LF, HF

External Signal Processing: High pass filter; DSP w/2-way filters

PERFORMANCE

Operating Range (-10 dB, Hz)

65 – 17k

Axial Sensitivity (1W @ 1m, dB SPL)

LF: 97

HF: 105

Full Range: 95

Power Handling/Impedance (Watts @ Ohms)

LF: 600 @ 8

HF: 150 @ 8

Full Range: 600 @ 8

Calculated Maximum Output Peak (dB SPL)

LF: 131

HF: 133

Full Range: 129

Calculated Maximum Output Long Term (dB SPL)

LF: 125

HF: 127

Full Range: 123

Nominal Coverage (degrees)

Horizontal: 60

Vertical: 60

Powering

Switchable: bi-amplified or passive

ORDERING DATA

Versions

MK2366i Black 2039505

MK2366i White 2039729

MK2366i-WP Black 2039735

Accessories Part Number
Eye Bolt 0.375-16 X 1.25 in, EB3825
104001
U-Bracket MK2(5)000 Black, UBKT2353
0007869
U-Bracket MK2(5)000 White, UBKT2353
0015076
Flybar SBK-MK23 VFS-VFR129 Black, FB2VSK
2038319

Dimensions (inches/millimeters)

Height: 30.00/762

Width (front): 15.54/394.7

Width (rear): 8.75/222

Depth: 14.75/374.7

Trap. Angle (degrees per side): 15

Weights (pounds/kilograms)

Net: 60/27.2

Shipping: 70/31.8